Most people buy their light bulbs at a hardware store, or maybe in the housewares aisle at their local grocery, but there’s a growing number of LED options available online. That includes a line of LED light bulbs from Hyperikon, an up-and-coming lighting manufacturer based out of California. The price for a single, dimmable 60W replacement LED? $8 on Amazon, or $7 direct.
Hyperikon pitches its bulb as an easy efficiency upgrade over a 60W incandescent, and at just 9 watts, it certainly fits the bill. On top of that, it offers strong dimming performance and above average color-rendering capabilities, which means that it’ll help the colors in your home look a little more vivid. That last bit gives Hyperikon a slight edge over alternatives that cost a little less per bulb, and makes this light a worthy option if you’re looking for a color rendering bump.
While Hyperikon’s LED doesn’t come with any real weak spots, it didn’t ace all of my tests, either. With 750 lumens to its name, its brightness fell slightly short of the 820 lumens printed on the box, though not enough so to make for a noticeably dimmer light bulb. With a power draw of 9 watts, it’s putting out 83 lumens per watt — that’s good but not groundbreaking, and not quite as efficient as a competing Sylvania Ultra LED that’s about twice s affordable as Hyperikon.
Still, this bulb gets all of the important stuff right. Replace a burnt-out incandescent with the Hyperikon LED and you’ll knock about six bucks off of your yearly energy bill, all without compromising on things like light quality or dimmability.
Speaking of dimmability, the Hyperikon LED promises to dim smoothly between 10 and 100 percent brightness on most modern dimming hardware. I tested it out on a number of switches and came away impressed. On modern switches, the bulb consistently dimmed down to about 8 percent at minimum while staying above 90 percent at maximum, which is a very good dimmable range.
More than the numbers, I was impressed with the bulb’s consistency, at least on modern dimming hardware. Switch for switch, the Hyperikon LED always dimmed as expected, hitting that same approximate dimmable rage and doing so without buzzing or flickering. However, things were less impressive with older dimming hardware. Though the dimmable range stayed solid, I definitely noticed some flicker when I tested the bulb out on an old rotary dial not intended for LEDs.
Check more detail: Click Here